Skip to main content
Share Dataverse

Share this dataverse on your favorite social media networks.

Featured Dataverses

In order to use this feature you must have at least one published dataverse.

Publish Dataverse

Are you sure you want to publish your dataverse? Once you do so it must remain published.

Publish Dataverse

This dataverse cannot be published because the dataverse it is in has not been published.

Delete Dataverse

Are you sure you want to delete your dataverse? You cannot undelete this dataverse.

Find Advanced Search

1 to 10 of 28 Results
Nov 25, 2018
Prifiharni, Siska; Ahmad, Denni; Juniarsih, Andini; Mabruri, Efendi, 2018, "Morfologi Struktur Mikro, Kekerasan, Dan Ketahanan Korosi Baja Tahan Karat Martensitik 13cr3mo3ni Hasil Quenching Dengan Variasi Temperatur Austenit", https://doi.org/10.5072/FK2/NAI8IL, RIN Dataverse, V1
Baja tahan karat martensitik tipe 410 biasa digunakan untuk aplikasi sudu turbin pada steam turbine. Perilaku baja tahan karat jenis ini dapat diperbaiki dengan berbagai cara, salah satunya yaitu dengan cara memodifikasi unsur baja tahan karat tipe 410 tersebut dan perlakuan pana...
Nov 25, 2018
Apriania, Annisa Siti; Anwar, Moch. Syaiful; Rusnaldya; Mabruri, Efendi, 2018, "Peningkatan Ketahanan Aus Pada Baja Tahan Karat Martensitik 13cr Aisi 410 Setelah Proses Austenisasi Dan Tempering", https://doi.org/10.5072/FK2/DBT5CO, RIN Dataverse, V1
Sudu (blade) turbin yang terbuat dari baja tahan karat martensitik 13Cr yang selalu beroperasi pada kecepatan putaran yang tinggi pada pembangkit listrik tenaga uap sering ditemukan kegagalan pada material tersebut. Salah satu penyebab kegagalan ini adalah adanya benda asing yang...
Nov 22, 2018
Astawa, I Nyoman Gede Putrayasa; Mabruri, Efendi; Purawiardi, R. Ibrahim, 2018, "Analisis Perbandingan Parameter Long-Range Order Sebagai Acuan Kontrol Kualitas Hasil Annealing Pasca Equal-Channel Angular Pressing (Ecap) Pada Al-5052", https://doi.org/10.5072/FK2/FUKH3L, RIN Dataverse, V1
Paduan Al-5052 merupakan salah satu kandidat utama material untuk aplikasi di industry maritime karena kemampuannya menahan korosi air laut dan semburan garam. Kualitas sifat mekanik dari material Al-5052 dipengaruhi oleh kualitas struktur kristalnya. Struktur Kristal yang solid...
Nov 20, 2018
Perdana, Hadi; Anwar, Moch. Syaiful; Juniarsih, Andinnie; Mabruri, Efendi, 2018, "Pengaruh Suhu Dan Waktu Tempering Terhadap Kekerasan, Struktur Mikro, Dan Laju Korosi Baja Tahan Karat Martensitik 13Cr3Mo3Ni", https://doi.org/10.5072/FK2/EPT4JH, RIN Dataverse, V2
Baja tahan karat 13Cr3Mo3Ni merupakan modifikasi dari baja tahan karat martensitik 410 untuk digunakan sebagai material sudu pada turbin uap. Tulisan ini memaparkan pengaruh suhu dan waktu tempering terhadap kekerasan, struktur mikro dan laju korosi baja tahan karat martensitik 1...
Nov 15, 2018
Mabruri, Efendi; Syahlan, Zefri Ahmad; Sahlan; Anwar, Moch. Syaiful; Romijarso, Toni B.; Adjiantoro, Bintang, 2018, "Effect of Tempering Temperature on Hardness and Impact Resistance of the 410-1Mo Martensitic Stainless Steels for Steam Turbine Blades", https://doi.org/10.5072/FK2/YYXGWW, RIN Dataverse, V1
Tempering is an important process to produce the martensitic stainless steels having the desired properties. This paper reports the influence of tempering temperature on hardness and impact resistance the modified 410-1Mo steels. The steels samples were prepared by a process sequ...
Nov 15, 2018
Prifiharni, Siska; Perdana, Hadi; Romijarso, Toni B; Adjiantoro, Bintang; Juniarsih, Andinie; Mabruri, Efendi, 2018, "The Hardness and Microstructure of The Modified 13Cr Steam Turbine Blade Steel in Tempered Conditions", https://doi.org/10.5072/FK2/HXVD6X, RIN Dataverse, V2
Martensitic stainless steels were usually used for turbine blade. Their properties can be improved in various ways, such as by heat treatment. This paper reports the influences of tempering temperature on hardness and microstructure of the modified 13Cr martensitic stainless stee...
Nov 11, 2018
Solihin; Mabruri, Efendi; Astawa, I Nyoman Gede Putrayasa, 2018, "Penguatan Tembaga Murni Dengan Teknik Equal Channel Angular Pressing", https://doi.org/10.5072/FK2/A7Y3GT, RIN Dataverse, V2
Penguatan tembaga murni dengan metode Equal Angular Channel Pressing telah dilakukan terhadap tembaga murni. Hasil pengerjaan ECAP dengan jalur ekstrusi ECAP rute Bc, dimana benda kerja diputar 90 ° setiap pass, menghasilkan pembelahan grain menjadi sub-grain yang memiliki ukuran...
Nov 8, 2018
Purawiardi, R. Ibrahim; Astawa, I Nyoman Gede Putrayasa; Mabruri, Efendi, 2018, "Studi Perubahan Struktur Kristal Material Hasil Perlakuan Equal Channel Angular Pressing Rute Bc dengan Variasi Jumlah Pass: Studi Kasus Sampel Aluminium Paduan 5052", https://doi.org/10.5072/FK2/656FDD, RIN Dataverse, V2
Proses Equal-Channel Angular Pressing (ECAP) merupakan salah satu metode yang digunakan untuk memodifikasi ukuran butir pada logam pejal. Studi ini menganalisis pengaruh jumlah pass pada logam hasil perlakuan ECAP rute Bc, yang dititikberatkan pada perubahan struktur kristal yang...
Nov 7, 2018
Mabruri, Efendi; Morinaga, Masahiko; Koyama, Toshiyuki; Sakurai, Shingo ; Murata, Yoshinori , 2018, "Diffusion of Re and Ru in the γ′ Phase of Ni based Alloys", https://doi.org/10.5072/FK2/RMQE9D, RIN Dataverse, V2
The diffusion of Re and Ru in the γ`-Ni3Al phase has been investigated at a range of temperatures 1423-1523 K by using the pseudo-binary diffusion couples. It was found that the concentration gradient of Re appeared to promote the uphill diffusion of Al, whereas that of Ru did no...
Nov 7, 2018
Mabruri, Efendi; Morinaga, Masahiko; Murata, Yoshinori ; Hattori, Masataka ; Kunieda, Tomonori; Hasuike, Kouichi, 2018, "Al and Re Interdiffusion in the γ-Phase of Ni-Al-Re System", https://doi.org/10.5072/FK2/BHT3AN, RIN Dataverse, V2
The activation enthalpies and frequency factors for interdiffussion of Al and Re in the γ-phase of Ni-Al-Re ternary system were estimated by a series of experiments using diffusion couples in the temperature range from 1200 to 1300°C. The method developed by Whittle and Green was...
Add Data

You need to Sign Up or Log In to create a dataverse or add a dataset.

Link Dataverse
Reset Modifications

Are you sure you want to reset the selected metadata fields? If you do this, any customizations (hidden, required, optional) you have done will no longer appear.

Contact RIN Dataverse Support

RIN Dataverse Support

Please fill this out to prove you are not a robot.

+ =
Send Message